drmaniac
07-03-2008, 11:45 PM
Hi There,
Iam about to get cracy...
I have 8 MTRON-MSP7025-16GB SSDs and cant get anything like fullspeed or what other people get...
First I tryd with Adaptec Series 5 Controller... due is was overheating and performed bad on SDDs I ordered
Areca ARC 1680ix-12
and
Areca ARC 1231ML
I setup an Raid0 with all 8 SSDs.... the 1680ix underperform, with Firmware 1.44 AND 1.45, I tryd all, but that was expected by me, due i read it here in the forum
BUT
the 1231ML ALSO dont get the max speed out?
Tryd ARC 1231ML 256MB Firmware 1.43 and 1.44(which is the newest one for him)
What i get is someting like 500-600 MB/S in Raid 0 Setup
http://xs229.xs.to/xs229/08274/tach155.jpg
File copy with h2testw is 361MB/S write 372MB/S read.
Volume Set Name ARC-1231-VOL#00
Raid Set Name Raid Set # 00
Volume Capacity 128.0GB
SCSI Ch/Id/Lun 0/0/0
Raid Level Raid 0
Stripe Size 64KBytes
Block Size 512Bytes
Member Disks 8
Cache Mode Write Back
Tagged Queuing Enabled
Volume State Normal
What can I do or what did I wrong?
Is there anything special to config for the 1231ML to get fullspeed with the SSDs like the other poeple here around?
:)
.
Monitors Dell 22" + 30" + 22" Tripple Setup
Workstation "BigBlack" LianLi Workstation with 18x5.25"
Intel Q6600@2.6 (for this test setup)
GF8800GTX + passive GF8600
Mainboard GA-965P-DQ6 Rev 3.3 latest Beta Bios
(due the normal bios version have a bug who killed my 1TB Drives!)
RAM G.Skill 8GB (4x2) DDR2-1000
HDDs 4TB Raid10 Seagate ES.2 Drives
SSDs 8 x Mtron Pro 2.5" 16Gig 120/90MB/s
SSD Storage : 2 x 5.25" Storage with each 4x2.5" Drivebay
Aquacomputer Watercooling System with Aquero Control
2x5.25 wide blue LCD Controll display (4x16chars)
Areca ARC-1231ML SATA / SAS PCI-E RAID Controller Card with 2GB Cache
Windows Vista Ultimate 64
Iam about to get cracy...
I have 8 MTRON-MSP7025-16GB SSDs and cant get anything like fullspeed or what other people get...
First I tryd with Adaptec Series 5 Controller... due is was overheating and performed bad on SDDs I ordered
Areca ARC 1680ix-12
and
Areca ARC 1231ML
I setup an Raid0 with all 8 SSDs.... the 1680ix underperform, with Firmware 1.44 AND 1.45, I tryd all, but that was expected by me, due i read it here in the forum
BUT
the 1231ML ALSO dont get the max speed out?
Tryd ARC 1231ML 256MB Firmware 1.43 and 1.44(which is the newest one for him)
What i get is someting like 500-600 MB/S in Raid 0 Setup
http://xs229.xs.to/xs229/08274/tach155.jpg
File copy with h2testw is 361MB/S write 372MB/S read.
Volume Set Name ARC-1231-VOL#00
Raid Set Name Raid Set # 00
Volume Capacity 128.0GB
SCSI Ch/Id/Lun 0/0/0
Raid Level Raid 0
Stripe Size 64KBytes
Block Size 512Bytes
Member Disks 8
Cache Mode Write Back
Tagged Queuing Enabled
Volume State Normal
What can I do or what did I wrong?
Is there anything special to config for the 1231ML to get fullspeed with the SSDs like the other poeple here around?
:)
.
Monitors Dell 22" + 30" + 22" Tripple Setup
Workstation "BigBlack" LianLi Workstation with 18x5.25"
Intel Q6600@2.6 (for this test setup)
GF8800GTX + passive GF8600
Mainboard GA-965P-DQ6 Rev 3.3 latest Beta Bios
(due the normal bios version have a bug who killed my 1TB Drives!)
RAM G.Skill 8GB (4x2) DDR2-1000
HDDs 4TB Raid10 Seagate ES.2 Drives
SSDs 8 x Mtron Pro 2.5" 16Gig 120/90MB/s
SSD Storage : 2 x 5.25" Storage with each 4x2.5" Drivebay
Aquacomputer Watercooling System with Aquero Control
2x5.25 wide blue LCD Controll display (4x16chars)
Areca ARC-1231ML SATA / SAS PCI-E RAID Controller Card with 2GB Cache
Windows Vista Ultimate 64